CO2 Incubators INCOmed

Classified as class IIa medical device. Equipment of basic model:
  • Temperature range from + 20 °C (however, min. 8 °C above ambient temperature) up to + 50 °C.
  • Spatial temperature deviation < ± 0.3 °C at 37 °C.
  • Temperature fluctuations with time acc. to DIN 12880:2007-05 ± 0.1 °C.
  • Working chamber st. steel 1.4301 (ASTM 304) deep-drawn.
  • Housing textured st. steel, rear zinc-plated steel.
  • Inner glass door and outer heated st. steel door.
  • Mains supply 230 V, 50 / 60 Hz.
  • 2 perforated st. steel shelves come with size 108, 3 perforated st. steel shelves with sizes 153 and 246.
  • Acc. to DIN 12880:2007-05, with CE-mark.
  • Adaptive, fuzzy-supported multifunctional digital PID-microprocessor controller.
  • Integrated fault diagnostic system for temperature, CO2 as well as humidity limit control.
  • 2 Pt100 sensors DIN class A in 4-wire-circuit monitoring each other and taking over the performance at the same temperature value.
  • CO2- supply via sterile filter.
  • Digital electronic CO2 control with automatic zeroing (infrared measuring system), ranging from 0 to 10 %, setting accuracy 0.1 %, barometric pressure compensation.
  • Interruption of CO2-supply upon door opening.
  • Integrated humidity limit control (88 to 97 %) with digital display of relative humidity, setting accuracy 1 %.
  • Digital real-time / weekly programme timer with day group function, precise minute setting.
  • Digital display of all parameters such as temperature, weekday, time, CO2, humidity and set-up values. Language to be chosen via set-up.
  • Resolution of setpoint and actual values: 0.1 °C.
  • Chip-card as STERICard to sterilise the working chamber, fixed cycle (4 h / 160 °C) without removing any sensors or mountings.
  • Works calibration certificate at 37 °C included.
Multiple overtemperature protection:
  • With audible and visual alarm on over- / under-temperature, over-CO2 and empty gas cylinder, open door, under-humidity and empty water tank (with optional humidity module), open door and empty gas cylinder.
  • Independently working, digital electronic overtemperature controller TWW, protection class 3.1.
  • Additionally integrated Automatic Safety Function 'ASF' for over- and undertemperature automatically following the setpoint value at a freely selectable tolerance range.
  • Mechanical temperature limiter TB protection class 1 to switch off heating at about 10 °C above max. oven temperature.
CO2 Incubators INCOmed  Memmert
ModelOutside dimensions
(W x D x H)
Inside dimension
(W x D x H)
PUOrder StockPrice/Unit/NOK 
INCO108med710 x 550 x 778560 x 400 x 4801087015536030-on demand 
INCO153med630 x 650 x 938480 x 500 x 6401538015536031-on demand 
INCO246med790 x 750 x 938640 x 600 x 64024611015536032-on demand 
Further accessories such as lockable door, FDA-conforming software, User-ID-Card, IQ / OQ on customer request.
Outside dimensions: depth plus 38 mm for door handle, height variable due to adjustable feet.
Inside dimensions: depth less 25 mm for fan.
Accessories for CO2 incubators INCOmed / Memmert
Additional modules CO2 incubators INCOmed / Memmert
Repair & maintenance of laboratory equipment / OMNILAB