Peltier Cooled Incubators IPPplus

Heating and cooling seamlessly with one system thanks to Peltier technology. In this respect, cooled incubators IPP not only contribute to climate protection, but also achieve an additional decrease in operating costs of up 90 % compared to compressor technology. Outstanding control precision and extremely small fluctuations.

Extremely quiet, space-saving and vibration-free due to the fact that no compressor is required. Peltier cooled incubators IPP / IPPplus can also be applied in entomology.

No condensation in the interior chamber: due to the closed Peltier cooling system, no outside air is exchanged. Formation of condensation during the cooling process takes place on the outside heat sink. In addition, the fans integrated in the Peltier elements ensure a rapid transport of energy as well as an optimal temperature distribution.

Energy-saving heating / cooling technology combination: particularly economical at temperatures close to the ambient temperature, since energy is only required during heating or cooling. Therefore heating and cooling function are particularly precisely adjusted to each other.
  • LED light module for model sizes 110 to 750 (optional): dimmable LED light in 3 alternative colour temperatures (coldwhite or warmwhite light or cold-white plus warm-white light, dimmable in 10 % steps).
  • Acc. to DIN 12880:2007-05, EN 61010-1 (IEC 61010-1), 61010-2-010.

AtmoCONTROL - control and logging software
For direct setting parameters as well as process time. Fast and easy programming of complex processes via AtmoCONTROL by means of the mouse or touchpad on the notebook.
  • Reading out, managing and organising the data logger.
  • Saving the log memory in various formats.
  • Online monitoring of up to 32 connected appliances.
  • Optical alarms when the alarm limits individually set at the ControlCOCKPIT are exceeded.
  • Automatic alarm to one or several e-mail addresses.

Standard equipment:
  • High-temperature connectors on the rear of the appliance for single-phase power connection acc. to country specific systems and IEC standards.
  • Internal data logger with a storage capacity of at least 10 years.
  • German, English, French, Spanish language settings available on the ControlCOCKPIT.
  • Digital backwards counter with target time setting, adjustable from 1 min to 99 days.
  • The SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamber.
  • Adjustment of 3 calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPIT.
  • Acc. to 12880:2007-05, EN 61010-1 (IEC 61010-1), 61010-2-010.
Standard equipment:

PID microprocessor control with integrated auto-diagnostic system
Interior:st. steel, material 1.4301 (ASTM 304), deep-drawn
Internals:st. steel grids (sizes 30 and 55: 1, sizes 110 to 1060: 2)
Housing:textured st. steel, rear zinc-plated steel, intuitively operated SingleDISPLAY (IPP) or TwinDISPLAY (IPPplus) colour graphical display with touchscreen
Double doors:outside st. steel, fully insulated, inside glass (sizes 750 and 1060 two-leaves)
Connection:mains cable with plug
Installation:4 feet; size 400 to 1060 on castors
Technical Data:
Working temperature range without light:0 (at least 20 °C below RT) to + 70 °C
Working temperature range with light:10 to 40 °C
Setting temperature range:0 to 70 °C
Setting accuracy:0.1 K
  • TwinDISPLAY: ControlCOCKPIT with 2 TFT colour graphical displays.
  • Available parameters on the ControlCOCKPIT: temperature, programme time, illumination.
  • 2 Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an error.
  • HeatBALANCE function for application specific adjustment of heat output distribution (balance) between the upper and lower heating groups in an adjustment range between - 50 and + 50 % (not valid for IPP110plus).
  • AtmoCONTROL software on an USB stick for programming, managing and transferring programmes via ethernet interface or USB port.
  • Intuitive programming and archiving of ramps and programme sequences.
  • Synchronous visualisation of the created programme sequence during programming.
  • Application-specific repeat functions (Loops) can be inserted within a temperature control programme in any place.
  • Simple creation of repeating weekly programmes.
  • ControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID function.
  • Displaying of already logged protocol data on the ControlCOCKPIT (max. 10000 values correspond to approx. 1 week).
  • Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading and implementing programmes and for online logging.
  • Multiple overtemperature protection: electronic temperature monitoring TWW (protection class 3.3) and mechanical temperature limiter TB (protection class 1) acc. to. DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN / MAX values for over / undertemperature alarm.
Memmert  Peltier Cooled Incubators IPPplus
Memmert  Peltier Cooled Incubators IPPplusMemmert  Peltier Cooled Incubators IPPplusMemmert  Peltier Cooled Incubators IPPplus   
TypeChamber volume
Inside dimension
(W x D x H)
Outside dimensions
(W x D x H)
PUOrder StockPrice/Unit/NOK 
IPP30plus32400 x 250 x 320585 x 506 x 7046015432167-36,373.00Order
IPP55plus53400 x 330 x 400585 x 586 x 7848015432168-39,227.00Order
IPP110plus108560 x 400 x 480745 x 656 x 86415015432169-55,955.00Order
IPP260plus256640 x 500 x 800824 x 756 x 118320015432170-78,339.00Order
IPP400plus384640 x 500 x 1200824 x 756 x 172020015445528-94,863.00Order
IPP750plus7491040 x 600 x 12001224 x 856 x 172620015432171-126,037.00Order
IPP1060plus10601040 x 850 x 12001224 x 1107 x 166120015445529-161,111.00Order
Inside dimensions: depth less 10 mm for fan - Peltier.
Outside dimensions: depth without door handle, depth of handle 56 mm. Height sizes 400, 750, 1060 with castors.
Further options such as a chamber modification for reinforced perforated st. steel shelves / grids, illumination unit or entry ports are available on request. Extra equipment has to be stated with the order directly.
Accessories for series U, I, S, ICH, ICP, IPP, IPS, HPP, HCP / Memmert
Repair & maintenance of laboratory equipment / OMNILAB