Vibrating Cup Mill PULVERISETTE 9

The vibrating cup mill PULVERISETTE 9 with new design offers a lot of practical features for the extremely quick size-reduction of hard, medium-hard, brittle and fibrous materials down to analytical fineness.
  • Increased grinding power due to a new drive concept.
  • Extra powerful grinding up to 1500 min-1.
  • Exact adjustment of rotational speed, grinding time and pause periods.
  • Programming and storage of grinding cycles.
  • Self-explanatory multilingual menu navigation.
  • Optimised tensioning and anti-twist protection of the grinding set.
  • Especially safe with interlocking switch of the hood.
  • Complete soundproof lining.
  • Ergonomically optimised grinding set changing.
  • Motor with a particularly interference, torque-optimised frequency transformer control: very good, loss-free grinding results in shortest time.
  • Due to horizontal circular oscillations the grinding sample is comminuted with extremely high pressure, impact forces and friction.
  • Loss-free working in hermetically close grinding sets.
  • Grinding set is placed on a guidance rail, allowing it to be easily moved to the final position and rapidly fastened in seconds with a quick clamping system.
  • Especially user-friendly: the grinding sets are equipped with insulated handles.
  • Easy cleaning due to few large parts.
  • Grinding sets are reduced in weight.
  • Ergonomic working position.
  • A special detector recognizes automatically if agate grinding sets for a metal-free grinding are used and reduces speed independently.
  • For dry- and wet-grinding.
  • Without grinding set.
  • Conformity: CE mark.
  • 2 years warranty.

  • Mining: for processing coal, ores or minerals for physical or chemical analysis.
  • Metallurgy: for grinding blast furnace slag or cast iron samples to determine additives needed.
  • Ceramics industry: for grinding rock samples to produce raw powder to determine CaCO3- and MgO-content or clinkers to study the constancy of the mineralogical structure.
  • Agriculture and environment: for preparing samples for chemical analysis of soils, sludges or vegetable matters.
  • Infrared and x-ray fluorescence analysis: for preparing samples with a short grinding time without contamination through undesired abrasion.
Technical Data:
Mains supply:200 to 240 V / 1~, 50 / 60 Hz, 1470 W
Motor shaft power acc. to VDE 0530, EN 60034:1.1 kW
Weight:net: 267 kg
gross: 330 kg
Dimensions floor instrument (W x D x H):77 x 76 x 116 cm
Emissions value of workplace acc. to DIN EN ISO 3746:2005:approx. 74 dB(A)
Working principle:impact
Max. feed size (depending on the material):12 mm
Min. sample quantity:10 to 20 ml
Max. sample quantity:250 ml
Final fineness:10 to 20 µm
Grinding parts:grinding puck with impact rings
Motor speed:600 to 1500 min-1
Useful capacity:50, 100 or 250 ml
Vibrating Cup Mill PULVERISETTE 9  Fritsch
DescriptionPUOrder StockPrice/Unit/NOK 
Vibrating cup mill PULVERISETTE 915426032-147,275.00Order
Grinding sets are available in 5 different materials and 3 different sizes from 50 to 250 ml volume.
Instrument also available in other voltages.
Grinding sets for vibrating cup mill PULVERISETTE 9 / Fritsch, Idar-Oberstein