Media Preparator Mediaprep Series

Media preparators designed for preparation and sterilisation of agar-containing nutrient media and other sterile liquids (10 to 120 l nominal volume), with microprocessor-controlled fully automatic programme sequence. The Systec Mediaprep series includes stronger heating elements, rapid cooling, magnetic stirring, inner vessel, temperature controlled door lock, dispensing outlet and inlet port for adding additives.
  • Fully automatic microprocessor control incorporating 100 programmes.
  • Sterilisation temperature pre-selectable up to 138 °C / 3.8 bar.
  • Novel automatic door closure with safety-lock system, lip-gasket out of silicone and opening at the push of a button.
  • Thermal door lock, controlled by pressure and medium temperature acc. to Pressure Vessel Regulations.
  • Pressure vessel made out of high quality pharmaceutical grade titanium-stabilised st. steel 1.4571 (V4A, AISI 316 Ti), electro polished, resistant against chemicals, easy to clean.
  • All sterilisation programmes with pre-selectable sterilisation parameters and automatic programme sequence.
  • Rapid cooling with recirculating sterile water, heat exchanger and recirculation pump.
  • Electronic pressure transducer for pressure and temperature regulation.
  • Autofill: automatic demineralised water feed for steam generation.
  • Steam exhaust condensation: water-cooled with thermostatic control.
  • Start by clock / timer for programmable start-time.
  • Prepared for subsequent printer connection.
  • RS232 interface for data transfer.
  • Temperature holding programme for keeping agar solutions warm.
  • Base plate for vessels, baskets etc. when used as autoclave.
  • Thermal insulation out of Hanno-Tect, no risk of particle dissociation.
  • Safety pressure release valve.
  • Safety cut off at low water level.
  • Safety cut off at excess temperature.
  • Direct electrical heated through strong heating elements for fast heat-up.
  • Fast cooling through recirculation of in-line sterilised demineralised water, cooled by a plate heat exchanger with cooling water connection.
  • Continuous mixing through a stirrer on the bottom of the media-vessel, contact free driven by a strong magnetic motor.
  • Permanent temperature control with a PT 100 temperature load sensor, directly inside the media.
  • Inlet-nozzle with safety screw-closure for filling of additives after sterilisation.
  • Media removal through a flexible silicone tubing (either by selectable internal pressure inside the chamber and an electronically controlled pinch valve or with an optional peristaltic pump). Furthermore all filling lines for petri-dishes available on the market or other dispensing devices can be connected, without any exception. The inner filling tube and the dispensing nozzle are sterilised in-line, during the sterilisation cycle.
  • Easy cleaning and operational readiness through exchangeable, removable inner vessel. Thereby no risk of cross-contamination between the different batches.
Systec  Media Preparator Mediaprep Series
Systec  Media Preparator Mediaprep SeriesSystec  Media Preparator Mediaprep Series    
TypeChamber volume
total / nominal
Inside size
Ø x D
(Ø x D)
Outside dimensions
(W x D x H)
Mains supplyPUOrder StockPrice/Unit/NOK 
Systec Mediaprep-1017296 x 25012270 x 222550 x 655 x 5303.60220 to 240 V, 50 / 60 Hz15842930-on demand 
Systec Mediaprep-2031296 x 45023270 x 422550 x 655 x 76510.0380 to 400 V, 50 / 60 Hz15842931-on demand 
Systec Mediaprep-3041296 x 65034270 x 622550 x 655 x 96510.0380 to 400 V, 50 / 60 Hz15842932-on demand 
Systec Mediaprep-4560400 x 48850380 x 452550 x 775 x 100020380 to 400 V, 50 / 60 Hz15842933-on demand 
Systec Mediaprep-6586400 x 69374380 x 657550 x 775 x 113020380 to 400 V, 50 / 60 Hz15842934-on demand 
Systec Mediaprep-90119500 x 615101480 x 572650 x 895 x 103020380 to 400 V, 50 / 60 Hz15842935-on demand 
Systec Mediaprep-120156500 x 795133480 x 752650 x 895 x 116020380 to 400 V, 50 / 60 Hz15842936-on demand